3D PRINTER BAMBULAB H2D Laser Full Combo

Το νέο μοντέλο της BambuLab που όλοι περιμέναμε ήρθε πλήρως ανανεωμένο, μεγαλύτερο, ταχύτερο και με πολλά νέα features! Θα το βρείτε στο 3DEXPERT, επίσημο μεταπωλητή BambuLab στην Ελλάδα!

• Dual-nozzle Multi-material 3D Printing
  
• Optional 10W/40W Laser and Cutting Module
  
• 350*320*325 mm³ Print Volume - (Single Nozzle 325x320x325mm , Dual Nozzle 300x320x325mm)
  
• 5μm Resolution Optical Motion Calibration
  
• Closed-loop Servo Extruder
  
• 350°C Nozzle & 65°C Active Chamber Heating

• Printing Technology Fused Deposition Modeling
• Body Build Volume (W*D*H) Single Nozzle Printing: 325*320*325 mm³
• Dual Nozzle Printing: 300*320*325 mm³
• Total Volume for Two Nozzles: 350*320*325 mm³
• Chassis & Shell Aluminum, Steel, Plastic and Glass
• Laser Safety Windows Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
• Air Assist Pump Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
• Physical Dimensions Physical Dimensions 492*514*626 mm³
• Net Weight 31 kg
• Toolhead Hotend All Metal
• Extruder Gear Hardened Steel
• Nozzle Hardened Steel
• Max Nozzle Temperature 350 °C
• Included Nozzle Diameter 0.4 mm
• Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
• Filament Diameter 1.75 mm
• Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
• Heatbed Supported Build Plate Type Textured PEI plate, Smooth PEI Plate
• Max Heatbed Temperature 120 ℃
• Speed Max Speed of Toolhead 1000 mm/s
• Max Acceleration of Toolhead 20,000 mm/s²
• Max Flow for Hotend (Standard Flow Hotend) 40 mm³/s(Test parameters: 250 mm round model with a single outer wall Bambu Lab ABS; 280 °C printing temperature)
• Max Flow for Hotend (Optional High Flow Hotend) 65 mm³/s(Test parameters: 250 mm round model with a single outer wall Bambu Lab ABS; 280 °C printing temperature)
• Chamber Temperatur Control Active Chamber Heating Supported Max Temperature 65 °C
• Air Purification Pre-filter Grade G3
• HEPA Filter Grade H12
• Activated Carbon Filter Type Granulated Coconut Shell
• Cooling Part Cooling Fan Closed Loop Control
• Auxiliary Part Cooling Fan Closed Loop Control
• Chamber Heat Circulation Fan Closed Loop Control
• Cooling Fan for Hotend Closed Loop Control
• Main Control Board Fan Closed Loop Control
• Chamber Exhaust Fan Closed Loop Control
• Supported Filament Type PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA CF/GF, PPS, PPS CF/GF Supported
• Sensor Live View Camera Built-in; 1920*1080
• Nozzle Camera Built-in; 1920*1080
• BirdsEye Camera Built-in; 3264*2448（Equipped with Laser Edition）
• Toolhead Camera Built-in; 1920*1080
• Door Sensor Supported
• Filament Run Out Sensor Supported
• Filament Tangle Sensor Supported
• Filament Odometry Supported with AMS
• Power Loss Recovery Supported
• Electrical Requirements Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz
• Max Power* 2200 W@220 V / 1320 W@110 V
• Average Power 1050 W@220 V / 1050 W@110 V
• Electronics Touchscreen 5-inch 720*1280 Touchscreen
• Storage Built-in 8 GB EMMC and USB Port
• Control Interface Touchscreen, mobile App, PC App
• Neural Processing Unit 2 TOPS
• Software Slicer & Software Bambu Studio, Bambu Suite, Bambu Handy
• Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
• Supported Operating System MacOS, Windows
• Wi-Fi Operating Frequency 2412-2472 MHz, 5150-5850 MHz (FCC/CE)
• 2400-2483.5 MHz, 5150-5850 MHz (SRRC)
• Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
• 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
• 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
• 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
• Wi-Fi Protocol IEEE 802.11 a/b/g/n
• 10W & 40W
• Laser Module Laser Type Semiconductor Laser
• Laser Wavelength Engraving Laser: 455 nm ± 5 nm Blue Light
• Height Measuring Laser: 850 nm ± 5 nm Infrared Light
• Laser Power 10 W ± 1 W; 40 W ± 2 W
• Laser Spot Dimension 10W: 0.03 mm * 0.14 mm; 40W: 0.14 mm * 0.2 mm
• Working Temperature 0 °C–35 °C
• Max Engraving Speed 10W: 400 mm/s; 40W: 1000 mm/s
• Max Cutting Thickness 10W: 5 mm; 40W: 15mm (Basswood Plywood)
• Laser Safety Class for Laser Module Class 4
• Overall Laser Safety Class* Class 1
• Engraving Area 10W: 310 mm * 270 mm; 40W: 310 mm * 250 mm
• XY Positioning Accuracy < 0.3 mm
• Z Height Measuring Method Micro Lidar
• Z Height Measuring Accuracy ± 0.1 mm
• Flame Detection Supported
• Temperature Detection Supported
• Door Sensor Supported
• Laser Module Installation Detection Supported
• Safety Key Included
• Ventilation Pipe Adapter Outer Diameter 100 mm
• Supported Material Type Wood, rubber, metal sheet, lether, dark acrylic, stone, and more
• Cutting Module Cutting Area 300*285 mm²
• Drawing Area 300*255 mm²
• Supported Pen Diameter 10.5 mm-12.5 mm
• Cutting Mat Type LightGrip and StrongGrip Cutting Mats
• Blade Type 45°*0.35 mm
• Blade Pressure Range 50 gf-600 gf
• Max Cutting Thickness 0.5 mm
• Blade and Pen Recognition Supported
• Cutting Mat Type Detection Supported
• Supported Image Type Bitmap and Vector Images
• Supported Material Type Paper, vinyl, leather, and more

Βοηθήστε μας να γίνουμε καλύτεροι υποβάλλοντας μια αξιολόγηση για το συγκεκριμένο προϊόν! Θα πρέπει να έχετε συνδεθεί στο λογαριασμό σας για να υποβάλετε μια κριτική, για λόγους εγκυρότητας. Σε καμιά περίπτωση δεν θα δημοσιευτούν τα στοιχεία σας, παρά μόνο το όνομα που θα δηλώσετε στο πεδίο "Το όνομά σας". Παρακαλούμε μη χρησιμοποιείτε greeklish ή ανάρμοστες εκφράσεις.

Πληκτρολογήστε το κωδικό που βλέπετε στην εικόνα: